Boost Function - Landis+Gyr E470 Series User Manual

92/143
14.8

Boost function

© Landis+Gyr

CR press B for Elec – This display details that the meter is in credit
mode and that supply control switch is armed ready for
reconnection.
C R P r e s s B f o r
import import

CR remote cut off – This display details that the meter is in credit
mode and the supply is in a disabled state due to a remote
disconnection command.
C R R e m o t e c u t
import import

Elec Supply – This display details that the meter is in credit mode
and the PIN is enabled but has not been entered, the supply status
at this point could be any of the modes e.g. On, Off or Armed.
E l e c S u p p l y
import import

Load limit press B – This display details that the meter is in credit
mode and the customer has exceeded the load limit value, the
supply status will be Armed.
L o a d L i m i t
import import
The credit mode status display also allows the user to navigate to other
display functions including the supply reconnection, the rolling display list
and customer menu. Access to each function is detailed below.

The supply control switch is accessed by selecting the B button

The customer menu is accessed by selecting the B button >2s

The rolling display menu is accessed by selecting the A button >2s
The boost function is accessed via the selection of the B button from the
Total Active Import display.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
E l e c
o f f
h h : m m
P r e s s B
Credit mode