Reconnect Supply Load Switch; Service Menu - Landis+Gyr E470 Series User Manual

Hide thumbs Also See for E470 Series:
Table of Contents

Advertisement

98/143

14.11 Reconnect supply load switch

14.12 Service menu

© Landis+Gyr
V o l t a g e
0 0 0 2 3 0 . 2
import
A further press of button A will navigate to the next item.
C u r r e n t
0 0 0 0 0 . 8 4
import
Once the end of the list has been reached the A button press will navigate
the user to the credit status.
At any point the display will revert to the default display after a timeout
period of 30 seconds from the last button press.
Note
Display items that are configured in this list but are designated as PIN
protected will only be shown if a PIN has NOT been set or, if a PIN has
been set and the correct PIN has been entered by the user.
The user may require to access the enable supply display where a system
initiated disable of supply has been performed, or if the meter entered a
load limiting state.
Where PIN protection is not enabled the user is directed to the reconnect
display with a short press of button A, from the Credit Mode Status display.
If PIN is enabled by the meter configuration the meter will require the
entering of the PIN in the PIN entry dialogue before allowing access to the
Credit Mode Status display.
If the user chooses not to reconnect the supply, then the A button should
be selected and the user is returned to the credit mode status display.
For the reconnection of the supply the B button should be selected, the
meter will then reconnect the supply load switch and indicate the action
with a temporary reconnect message.
The Service Menu provides utility engineers with the access to meter
functions that are not for general consumer use.
The service menu can only be accessed by performing a removal and
reconnection of the meter terminal cover (as detailed in section 19.)
The service menu allows the following actions to be performed.
Enter In Service Test Mode
HAN Join / Unjoin management
View the Security Log for the meter
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
V
A
Credit mode

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3 smets2

Table of Contents