Leave/Join Han; Display Security Log; Exit Service Menu - Landis+Gyr E470 Series User Manual

100/143

14.12.2 Leave/join HAN

14.12.3 Display security log

14.12.4 Exit service menu

© Landis+Gyr
If the user chooses not to enter IST mode, then the A button should be
selected.
The user can exit IST mode by selecting the B button from the service
menu followed by the A button.
From In-Service Test (IST) display a press of button A leads to the leave
HAN display (if meter is currently joined to the ZigBee network) or to the
join HAN display (if meter is currently un-joined from the ZigBee network).
Selecting the B button, leaves or joins the ZigBee network, respectively.
The user is shown a progress / result confirmation before returning to the
IST display.
By selecting the A button, the user is choosing not to join or leave the
ZigBee network and is directed back to the IST display.
From In-Service Test (IST) display two presses of button A leads to the
Display Security Log display, pressing button B will display the security log
entries, which can be scrolled using the A button at the last entry and
selection a further selection of the A button the display is directed back to
the IST display.
The engineer can exit the service menu by selecting the A button four times
from the In-Service Test (IST) display, or waiting 5 minutes for the meter to
exit the service menu.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2 Credit mode