Credit Mode; Display And Navigation Structure In Credit Mode - Landis+Gyr E470 Series User Manual

Credit mode

14 Credit mode
14.1

Display and navigation structure in credit mode

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
Figure 22 shows the top-level credit mode display and navigation structure.
An overview of the main components of the display structure are:
Default display – In credit mode the default display is the total meter index
in kWh for active import (see section 14.3).
All segment display – After viewing the initial default the next display
shown in the sequence is the all segment display check (see section
14.4).
Tariff display list – The tariff display list is accessed from the default
display by holding button B and then navigating through the individual items
by further presses of button A. The tariff list displays information for tariff
TOU registers, tariff block counters and tariff TOU block registers (see
section 14.5).
PIN enabled – The PIN display if configured requires the users previously
configured PIN to be entered to gain access to further displays held by
the meter. This is a feature to ensure consumer data privacy if enabled
(see section 14.6).
Credit status display – Accessible from the all segment display using
button A. (NOTE that access can also be PIN protected). The display
will show the status of the meter (see section 14.7).
Boost menu – The boost menu is accessed via a short press of the B
button when viewing the total active import display (see section 14.8).
Customer menu – The customer menu is accessed via a long press of the
B button when viewing the credit status display. The customer menu
contains the following functionality (see section 14.9);

PIN management

Viewing of Event Log

Viewing of Power Log

ALCS management
Rolling display list – a list of meter values (rolling registers and PIN
displays) accessible from the credit status display holding button A and
then navigating through the individual items by further presses of
button A (see section 14.10).
Supply control – The supply control switch management can be accessed
from the credit status display by pressing the B button. The credit
status will define this access (see section 14.11). If PIN protection is
enabled, then PIN entry is required before access is granted (see
privacy PIN entry dialogue structure shown in Figure 20).
Service Menu – The service menu is only accessible by removal and
replacement of the meter terminal cover, and is only for the access of
the utility meter or test engineers (see section 14.12).
The service menu allows the following actions to be performed:

Enter In Service Test Mode

HAN Join / Unjoin management

View the Security Log for the meter
87/143
© Landis+Gyr