Safety; Safety Information; Responsibilities - Landis+Gyr E650 Series User Manual

Safety

2 Safety
2.1

Safety Information


2.2

Responsibilities

D000030110 d – E650 Series 3 (ZMD400AT/CT, ZFD400AT/CT) – User Manual
This section describes the safety information used in this manual, outlines
the responsibilities and lists the safety regulations to be observed.
Attention is drawn as follows in the individual chapters of this user manual
to the relevant danger level, i.e. the severity and probability of any danger:
Definition of Danger
For a possibly dangerous situation, which could result in severe physical
injury or fatality.
Definition of Warning
For a possibly dangerous situation, which could result in minor physical
injury or material damage.
Definition of Note
For general details and other useful information to simplify the work.
In addition to the danger level, all safety information also describes the type
and source of the danger, its possible consequences and measures to
counteract the danger.
The owner of the meters – normally the utility – is responsible that all per-
sons engaged in work with meters:
1. Are competent and qualified in accordance with national regulations
(see ISSA "Guideline for Assessing the Competence of Electrically
Skilled Persons").
2. Have read and understood the relevant sections of the user manual.
3. Strictly observe the safety regulations (according to section 2.3 "Safety
Regulations") and the operating information in the individual chapters.
In particular, the owner of the meters bears responsibility

for the protection of persons,

prevention of material damage

and the training of personnel.
Landis+Gyr AG provide training courses for this purpose on specific
equipment; please contact the relevant agent if interested.
31/93
© Landis+Gyr AG