Landis+Gyr E470 Series User Manual page 8

8/143
About this document
Scope
Purpose
Target group
Intended use and
installation
Reference documents
Terms and
abbreviations
© Landis+Gyr
This User Manual and Functional Description document describes the
functionality provided by the E470 Series 3 SMETS2 Smart Electricity
Meter.
This version of the hardware and firmware provides functionality as speci-
fied in the second version of the UK's Smart Metering Equipment Technical
Specifications (SMETS2).
This manual contains information required for the application of the meters
for their intended purpose as defined in the section "Intended use and in-
stallation" below. This includes:

Characteristics, construction, and functionality of the meters.

Information about possible dangers, their consequences, and
measures to prevent them.

A detailed description of the tasks to be performed during the entire
life-cycle of the meters (configuration, installation, commissioning,
operation, maintenance, and disposal).

Guidance on the functions provided by the meter.
The contents of this user manual are intended for technically qualified per-
sonnel responsible for system planning, testing, installation and
commissioning, operation, maintenance, decommissioning and disposal of
the meters.
The meters record four quadrant energy consumption in single phase two
wire networks. For this purpose, they are directly installed in the supply line
by the energy supply company and provide readings for energy charging
and other purposes.
The meter is intended for installation by qualified personnel. The meter
conforms to British Standards and is suited to installation in environments
that also align to British Standards. The meter must be installed away from
powerful sources of electromagnetic interference.
There are no user serviceable parts within the meter and the meter must be
returned to the manufacturer or an authorised partner for repair and/or
maintenance. There are no permissible adjustments to meter installation
procedure or meter operation outside those covered by the detailed oper-
ational instructions contained within this document.
If the meter is used in a manner not specified by the manufacturer the pro-
tection provided by the meter may be impaired.
The following document provides further information related to the subject
of this document:

E470 SMETS2 Events and Alerts
A list of terms and abbreviations used in this document is available at the
end of this document.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2 About this document