Mounting The Meter - Landis+Gyr E470 Series User Manual

42/143
6.2

Mounting the meter

© Landis+Gyr
The meter should be mounted as follows on the meter board or similar
device provided for this purpose.
1. Find the correct meter position for mounting the meter.
2. Define the desired form of fixing.
3. Remove the main fuses and keep them in a safe place until installation
is completed. Ensure the connecting wires are NOT live and check
this using a phase tester or universal measuring instrument.
4. Mark the three fixing points (see the illustration below) on the mounting
surface:

Horizontal base of location points = 105 mm

Height of suspension point = 110 mm
Figure 12 Mounting points
5. Unscrew the meter terminal cover.
6. Fit the meter with the three fixing screws.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2 Installation and Commissioning