Top Level Display Structure - Credit Mode; Default Display - Landis+Gyr E470 Series User Manual

88/143
Top level display structure – credit mode
14.2
Service menu
Service Menu active for 5
minutes from last tamper
event
Press button briefly (t < 2 s)
Press button longer (t ≥ 2 s)
30 second timeout from last button press –
returns display to Total active import display
*Rolling display list items and sequence defined by meter configuration
14.3

Default display

© Landis+Gyr
Top Level Display Structure – Credit Mode
timeout/Exit
Tariff display
list
timeout/last A A
Customer menu
Exit
Figure 22 Credit mode display and navigation structure
The default display of the meter in credit mode will show the total active
import energy information. This will be:
a) the Active Import energy consumed in the currently active rate when
the meter is configured with a TOU tariff, or
b) the Active Import energy consumed in the currently active Block x TOU
y register when the meter is configured with a Block TOU tariff.
Selecting the A button will direct the user to the All Segment display
Pressing and holding the B button for >2s will direct the user to the Tariff
Display List.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
yes
Terminal cover
tamper detected?
no
Total active import
B B
display
A A
All segment display
(display check)
A A
timeout
Is PIN enabled?
no
B B
Credit mode status Credit status Credit status
display display display
A A
A A
last
Rolling display
list*
A A
B B
Boost Dialogue
timeout/exit
yes
PIN entry dialogue
Locked or Unlocked
no
Display
unlocked?
B B
yes
Supply
control switch
armed?
yes
Enable supply?
B=yes, A=no
B B
Supply enabled
3 seconds
Credit mode
no
A A