View Event Log; View Power Log; Manage Alcs; Join Han - Landis+Gyr E470 Series User Manual

Credit mode

14.9.2 View event log

14.9.3 View power log

14.9.4 Manage ALCS

14.9.5 Join HAN

14.10 Rolling display list

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
If no PIN has been enabled the user can Enable a PIN if the user chooses
not to create the PIN at this point, then the B buttons should be selected
which will return the user to the customer menu.
If the user wishes to enable the PIN then the A button should be selected,
the display will then direct the user to the Enter PIN screen. The user
should enter the required 4-digit PIN at this point followed by the A button,
the user is then asked to enter the 4-digit PIN a second time to confirm that
they match, if the Pins match the meter will save the details and notify that
the PIN has been enabled and return the user to the customer menu.
From the customer menu if the user selects the A button twice they are
directed to the View Event Log display; selecting the B button will enable
the Rolling Event Log Data where the meter will display the recorded event
details.
From the customer menu if the user selects the A button three times they
are directed to the View Power Log display; selecting the B button will
enable the Rolling Power Log Data where the meter will display the
recorded event details.
From the customer menu if the user selects the A button four times they are
directed to the ALCS display; selecting the B button will enable the testing
of the ALCS setting.
Selecting the A button will direct the user to the Exit Menu where they can
be directed back to the credit mode status display.
Test ALCS – on access to the test ALCS display the user is presented with
a yes and no option, selecting the A button will exit the function, selecting
the B button a change to the ALCS state will be applied for 5 minutes, after
activation the user is directed back to the customer menu.
This provides the option to join a HAN (but not leave a HAN) as described
in section 14.12.2.
The Rolling Display List is accessible from the Credit Mode Status display
by pressing the A button for >2s.
The content and order of the normal display list is indicated in Table 9
"Rolling register listings".
The user can step through the list of display items in the rolling display list
using button A. For example, total active Import, voltage and current, would
display as follows.
T o t a l A c t I m p o r t
import
Press button A to navigate to the next item.
0 0 2 2 2
kWh
97/143
© Landis+Gyr