Safety; Safety Information; Responsibilities - Landis+Gyr E650 Series 4 User Manual

6/96
1

Safety

1.1

Safety information


1.2

Responsibilities

© Landis+Gyr
This section describes the safety information used in this manual, outlines
the responsibilities and lists the safety regulations to be observed.
The following symbols are used to draw your attention to the relevant
danger level, i.e. the severity and probability of any danger, in the individual
sections of this document.
Warning
Used to indicate a dangerous situation that could cause bodily injury or
death.
Caution
Used to indicate a situation/ action that could result in material damage or
loss of data.
Note
Used to indicate general guidelines and other useful information.
In addition to the danger level, safety information also describes the type
and source of the danger, its possible consequences and measures for
avoiding the danger.
The owner of the meters – usually the utility company – is responsible for
ensuring that all persons working with meters:

Have read and understood the relevant sections of the user manual.

Are appropriately qualified for the work to be performed.

Strictly observe the safety regulations (laid down in section 1.3) and the
operating instructions as specified in the individual sections.
In particular, the owner of the meters bears responsibility for the protection
of persons, prevention of material damage and the training of personnel.
For this purpose, Landis+Gyr provides training on a variety of products and
solutions. Contact your local Landis+Gyr representative if interested.
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
Safety