Customer Privacy Pin - Landis+Gyr E470 Series User Manual

Customer privacy PIN

12 Customer privacy PIN

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
When operating in the credit or prepayment mode, the meter allows for the
protection of personal data items and certain interface commands that may
otherwise appear on the display.
The PIN (if enabled) also restricts or protects certain user interface
command such as;

Activate emergency credit

Add credit

Allow access to user interface

Enable supply

Disable PIN protection

Set privacy PIN
The customer privacy PIN may be enabled, changed or disabled by the
user.
If enabled, then the customer privacy PIN will be a 4-digit sequence set by
the user on the meter display and pressing buttons A and B.
If the customer privacy PIN is enabled, then the meter will offer the PIN
entry dialogue (see section 12.1) when the display check is activated by
briefly pressing button A and then button A is pressed briefly again. The
user may then enter the PIN or not as they choose. If the correct PIN is
entered, then all applicable displays will be available to the user. If an
incorrect PIN or the entry is skipped, then all displays containing personal
data will not be included in the display sequence.
The default on delivery of a meter is for the customer privacy PIN to be
disabled. Once commissioned, or later during the service of the meter, a
customer privacy PIN may be enabled and set using the PIN edit dialogue
(see section 12.2).
Note
Following entry of a correct customer privacy PIN, then all displays
containing personal data will be available for a period of 30 seconds
following the last button press.
81/143
© Landis+Gyr