Collect Final Drive Oil Sample - SANY SY35U Operation And Maintenance Manual

Maintenance

Collect Final Drive Oil Sample

1. Obtain an oil analysis sample kit from a SANY dealer.
2. Operate the machine to normal operating temperature.
3. Prepare the machine for service. See "Maintenance Safety" on page 2-8.
NOTICE!
It is critical that all material used to collect the sample is absolutely clean. Failure to follow
this notice could damage the machine, cause it to operate improperly, or contaminate the
sample.
4. Remove the final drive check plug. See "Check and Add Final Drive Oil" on page 5-72.
5. Insert the oil sample tube into the final drive and collect a sample of final drive oil. Install the final drive check
plug.
6. Send the sample for testing according to the instructions packaged with the sample kit.
5-74
Operation and Maintenance Manual — 0120
SY35U Excavator OMM
SANY