SY35U Excavator OMM
Operating Mode Screen
Use the Operating Mode screen to select a work tool or the
equivalent one-way or two-way flow.
The Operating Mode screen displays the bucket (1) as the
default work tool. The auxiliary ports are used for
hydraulic work tools. Select the hydraulic work tool icon
prior to operating it.
•
Bucket (default) (1)
•
Breaker (2)
•
Clamshell bucket (3)
•
Tilt bucket (4)
•
Auger (5)
•
Rotary grapple (6)
•
Grapple (7)
•
Brush cutter (8)
NOTE: Check the work tool operator manual or contact a SANY dealer for hydraulic flow rate information.
1. Press the button below the left/right arrow icon (9) to scroll to and illuminate the selected work tool icon.
2. Press the button below the information icon (10) to access the Flow Rate Information screen. Flow rate for a
work tool can be adjusted on this page. See "Flow Rate Setting Screen" on page 3-45.
3. Press the button below the check-mark icon (11) to confirm the selected work tool.
NOTE: To return to the previous screen, press the button below the return icon (12).
SANY
Fig. 3-63
Operation and Maintenance Manual — 0120
Machine Controls
1
2
8
7
10
9
11
3
4
6
5
12
0003816
3-43