Check The Hydraulic Oil Level; Windshield Washer Fluid Check And Fill - SANY SY35U Operation And Maintenance Manual

SY35U Excavator OMM

Check the Hydraulic Oil Level

1. Position the work equipment (1) as shown on the
hydraulic tank decal.
2. Prepare the machine for service. See "Maintenance
Safety" on page 2-8.
3. Check the hydraulic oil level in the hydraulic tank
through the sight gauge (2). The hydraulic oil level
should be between the H (3) and L marks (4).
4. If the level is below the L mark, add hydraulic oil. See
"Add Hydraulic Oil" on page 5-57.
Windshield Washer Fluid Check and
Fill
Prepare the machine for service. See "Maintenance Safety"
on page 2-8.
Check the windshield washer fluid level in the windshield
washer reservoir (1). Fill with clean windshield washer
fluid as necessary.
NOTE: Keep dust and dirt out of the windshield
washer tank when adding windshield washer
fluid.
SANY
Fig. 4-8
Fig. 4-9
Fig. 4-10
Operation and Maintenance Manual — 0120
Machine Operation
1
2
3
4
1
0002925
0003775
0003781
4-11