Change The Engine Oil And Filter - SANY SY35U Operation And Maintenance Manual

SY35U Excavator OMM

Change the Engine Oil and Filter

NOTE: See "Fluid Capacities" on page 5-11 for the engine oil capacity.
1. Prepare the machine for service. See "Maintenance Safety" on page 2-8.
NOTICE!
Dispose of used oil and filters in according to all applicable environmental regulations. Failure
to do so could damage the environment.
2. Remove the four fasteners (1) and oil drain cover (2).
3. Place a suitable container under the engine oil drain
plug (4).
4. Remove the engine oil drain plug and allow the oil to
completely drain.
5. Install and tighten the engine oil drain plug.
6. Install oil drain cover and fasteners.
SANY
Fig. 5-26
Fig. 5-27
Operation and Maintenance Manual — 0120
2
1
4
Maintenance
1
0003858
0003838
5-33