Machine Moving Precautions; Travel Controls; Forward Travel; Reverse Travel - SANY SY35U Operation And Maintenance Manual

SY35U Excavator OMM

Machine Moving Precautions

WARNING!
• Check the surroundings and sound the horn before moving the machine.
• Personnel are not allowed to approach the machine without operator approval.
• If the travel motors are in the front of the machine, the travel control pedals will operate in
reverse. Check the position of the travel direction arrows on the track frame before
traveling.
• The rear of the machine is a blind area. Use the mirror and be extremely careful when
backing up the machine. Use a signalman as needed.
Failure to follow these warnings could result in death or serious injury.
NOTICE!
• Standard travel direction: The idlers are in the front of the track frame, and the travel
motors are at the rear of the track frame. If the travel motors are at the front of the machine,
the travel control levers/pedals will operate in reverse. Check the position of the travel
motors before traveling.
• Stop the machine for 5 minutes after every 15 minutes of traveling. Prolonged traveling
may strain the travel motors.

Travel Controls

Forward Travel

Push both travel control levers forward or press the top of
both foot pedals equally to move the machine forward.

Reverse Travel

Pull both travel control levers backward or press the
bottom of both foot pedals equally to move the machine in
reverse.
SANY
Fig. 4-22
Operation and Maintenance Manual — 0120
Machine Operation
0002835
4-25