Optional Equipment
OPTIONAL EQUIPMENT SELECTION
Consult a SANY dealer before installing any optional equipment to the machine. Depending on the type of optional
equipment selected, protective structures (such as front guards or top guards) may need to be installed on the
machine.
Only install SANY-approved optional equipment. SANY assumes no responsibility for accidents, loss, or failures
caused by any optional equipment.
READ EQUIPMENT INSTRUCTION
Read and understand the optional equipment manual before installing and operating any optional equipment. Do
not exceed the manufacturer's specifications for maximum flow and pressure of optional equipment.
If the optional equipment manual is missing or damaged, contact the manufacturer of the optional equipment to
obtain a replacement.
Installation and Removal Precautions
NOTICE!
The following precautions must be strictly observed when selecting, installing, and operating
optional equipment. Failure to follow this notice can damage the machine or cause it to
operate improperly.
•
Follow the instructions in this manual and in the optional equipment manual.
•
Remove and install equipment only on a firm, level surface.
•
Use an appropriate lifting device when handling heavy objects.
•
Never stand under a suspended load.
•
Make sure the machine is well-balanced and supported whenever installing or removing optional
equipment.
For additional information about removal and installation of optional equipment, consult a SANY dealer.
7-2
Operation and Maintenance Manual — 0120
SY35U Excavator OMM
SANY
Need help?
Do you have a question about the SY35U and is the answer not in the manual?