SY35U Excavator OMM
Flow Rate Setting Screen
The Flow Rate Setting screen displays the flow rate
information of the operating mode of the hydraulic work
tool selected in the Flow Rate Information screen.
•
Check the work tool operator manual for hydraulic
flow rate information.
•
When the bar graph (1) has been set to the highest
level, the flow rate is at its maximum (100%).
•
When the bar graph has been set to its lowest level
(no bar is visible), the flow is blocked and no
hydraulic oil will flow.
Flow rate of the selected function in the Flow Rate
Information screen can be adjusted in the bar graphic in the
Flow Rate Setting screen.
1. Press the button below the plus icon (2) to increase the
length of the bar graph, which will increase the flow
rate.
2. Press the button below the minus icon (3) to decrease
the length of the bar graph, which will lower the flow
rate.
3. Press the button below the check-mark icon (4) to confirm the flow rate adjustment.
NOTE: To return to the previous screen, press the button below the return icon (5).
SANY
Fig. 3-65
Operation and Maintenance Manual — 0120
Machine Controls
1
3
4
2
5
0003817
3-45
Need help?
Do you have a question about the SY35U and is the answer not in the manual?