SANY SY35U Operation And Maintenance Manual page 199

SY35U Excavator OMM
2. Open the engine hood (1). See "Opening the Engine
Hood" on page 5-25.
3. Open the right rear access door (2). See "Opening the
Right Rear Access Door" on page 5-26.
NOTE: Allow several minutes for any accumulated
battery gases to clear before servicing the
battery.
4. Turn the battery disconnect switch (3) to the OFF
position.
5. Check the positive (1) and ground (2) terminals for
corrosion or loose connections under the protective
covers. Clean the area with a mixture of baking soda
and warm water and tighten fasteners as needed.
6. Wipe down the battery and terminals with a clean
cloth.
7. Remove any trash or debris from the battery
compartment.
8. Use a corrosion-preventing coating on the battery
terminals.
SANY
1
Fig. 5-52
Fig. 5-53
Operation and Maintenance Manual — 0120
Maintenance
3
1
2
2
0003770
0003861
5-53