Date And Time Setup Screen; System Unlocked Screen; Reserved Function - SANY SY35U Operation And Maintenance Manual

Machine Controls

Date and Time Setup Screen

The Date and Time Setup screen is accessed by selecting
the Time Calibration icon on the Function List screen and
allows changes to be made to the date, time, and time zone.
1. Press the button below the up/down icon (1) to increase
the value of the selected position.
2. Press the button below the left/right icon (2) to select
the position for adjustment.
3. Press the button below the check-mark icon (3) to
confirm the time adjustment.
NOTE: To return to the previous screen, press the
button below the return icon (4).

System Unlocked Screen

For factory and service use only.

Reserved Function

Not used at this time. Reserved for future function.
3-46
Operation and Maintenance Manual — 0120
SY35U Excavator OMM
1 2
Fig. 3-66
3 4
0003818
SANY