Travel; General Travel Instructions - SANY SY35U Operation And Maintenance Manual

Machine Operation

TRAVEL

General Travel Instructions

WARNING!
• Check the surroundings and sound the horn before moving the machine.
• Personnel are not allowed to approach the machine without operator approval.
• If the travel motors are in the front of the machine, the travel control pedals will operate in
reverse. Check the position of the travel direction arrows on the track frame before
traveling.
• The rear of the machine is a blind area. Use the mirror and be extremely careful when
backing up the machine. Use a signalman as needed.
Failure to follow these warnings could result in death or serious injury.
• The machine's travel direction is controlled by the
travel control levers/pedals and is dictated by the
location of the travel direction arrows on the track
frame relative to the cab.
• With the travel motors (1) positioned behind the cab,
press the top of the travel control pedals or push the
travel control levers to move the machine forward.
• Select a flat travel surface and travel in a straight line.
If possible, turn the machine slowly and gradually.
• Never let the machine make contact with power lines
or bridges (2).
4-34
Fig. 4-44
Fig. 4-45
Operation and Maintenance Manual — 0120
SY35U Excavator OMM
0002878
2
0002880
SANY
1