Travel Controls - SANY SY75 Operation And Maintenance Manual

Cab Interior

Travel Controls

WARNING!
Take extra care when using the pedals to steer the machine. Never rest your foot on a pedal
unless you are driving or steering the machine. Failure to observe and follow this warning
could cause an unexpected movement of the machine which could result in death or injury.
WARNING!
The center of gravity position and boom length is different on machines with a long arm. Take
extra care when traveling with this machine and be aware of the extra clearances needed
when turning the machine and operating a long arm. Failure to do so could result in death or
injury.
Always note the following before operating the travel controls:
• Directional arrow (a) on each of the two track
frames indicates the forward direction of the lower
structure. Check these arrows before using the
travel control levers. When possible, face the cab in
this direction.
• When the cab faces backward, the travel direction
will be the reverse of the figure shown here.
(Machine moves forward when you pull control
levers and backward when you push them.)
The steering controls consist of the following:
• Steering control levers (b)
• Steering control pedals (c)
NOTE: Footrests (d) is not a control device.
NOTE: When a steering control lever or joystick is
released, it returns to neutral position and
machine movement stops.
3-20
Operation and Maintenance Manual — 0220
SY75C Excavator OMM
a
Fig. 3-24
b
d
Fig. 3-25
d
c
SANY