F7: Communication Options - YASKAWA CR700 Technical Manual

10.9 F: Options
No.
Name
(Hex.)
F6-59 DeviceNet Power
Scaling
(03DA)
F6-60 DeviceNet Voltage
Scaling
(03DB)
F6-61 DeviceNet Time Scaling
(03DC)
F6-62 DeviceNet Heartbeat
Interval
(03DD)
F6-63 DeviceNet Network
MAC ID
(03DE)
F6-64 to F6-67 Dynamic Out Assembly
109 Param 1 to 4
(03DF - 03E2)
F6-68 to F6-71 Dynamic In Assembly
159 Param 1 to 4
(03E3, 03E4,
03C7, and
03C8)
F6-72 PowerLink Node
Address
(081B)

F7: Communication Options

◆
No.
Name
(Hex.)
F7-01 IP Address 1
(03E5)
F7-02 IP Address 2
(03E6)
F7-03 IP Address 3
(03E7)
F7-04 IP Address 4
(03E8)
F7-05 Subnet Mask 1
(03E9)
494
Description
V/f CL-V/f OLV CLV AOLV
Sets the power scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the voltage scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the time scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the heartbeat for DeviceNet communication. Set this parameter to 0 to disable the
heartbeat function.
V/f CL-V/f OLV CLV AOLV
Sets the function to see the actual DeviceNet MAC address using the keypad. This
parameter functions as a monitor only.
V/f CL-V/f OLV CLV AOLV
Sets Configurable Outputs 1 to 4 written to the MEMOBUS register.
V/f CL-V/f OLV CLV AOLV
Sets Configurable Inputs 1 to 4 read from the MEMOBUS register.
V/f CL-V/f OLV CLV AOLV
Sets the node ID for PowerLink communication.
Note:
Be sure to set an address that is different than all other node addresses. Do not set
this parameter to 0.
Description
V/f CL-V/f OLV CLV AOLV
Sets the first octet of the IP Address for the device that is connecting to the network.
Restart the drive after you change this parameter.
Note:
When F7-13 = 0 [Address Mode at Startup = Static]:
• Use parameters F7-01 to F7-04 [IP Address 1 to 4] to set the IP Address. Be sure
to set a different IP address for each drive on the network.
• Also set parameters F7-05 to F7-12 [Subnet Mask 1 to 4, Gateway Address 1 to
4].
V/f CL-V/f OLV CLV AOLV
Sets the second octet of the IP Address for the device that is connecting to the network.
Restart the drive after you change this parameter.
Note:
When F7-13 = 0 [Address Mode at Startup = Static]:
• Use parameters F7-01 to F7-04 [IP Address 1 to 4] to set the IP Address. Be sure
to set a different IP address for each drive on the network.
• Also set parameters F7-05 to F7-12 [Subnet Mask 1 to 4, Gateway Address 1 to
4].
V/f CL-V/f OLV CLV AOLV
Sets the third octet of the IP Address for the device that is connecting to the network.
Restart the drive after you change this parameter.
Note:
When F7-13 = 0 [Address Mode at Startup = Static]:
• Use parameters F7-01 to F7-04 [IP Address 1 to 4] to set the IP Address. Be sure
to set a different IP address for each drive on the network.
• Also set parameters F7-05 to F7-12 [Subnet Mask 1 to 4, Gateway Address 1 to
4].
V/f CL-V/f OLV CLV AOLV
Sets the fourth octet of the IP Address for the device that is connecting to the network.
Restart the drive after you change this parameter.
Note:
When F7-13 = 0 [Address Mode at Startup = Static]:
• Use parameters F7-01 to F7-04 [IP Address 1 to 4] to set the IP Address. Be sure
to set a different IP address for each drive on the network.
• Also set parameters F7-05 to F7-12 [Subnet Mask 1 to 4, Gateway Address 1 to
4].
V/f CL-V/f OLV CLV AOLV
Sets the first octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup = Static].
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
Default
Ref.
(Range)
0 678
(-15 - +15)
0 678
(-15 - +15)
0 678
(-15 - +15)
0 678
(0 - 10)
0 678
(0 - 63)
0000H 678
(0000H - FFFFH)
0000H 678
(0000H - FFFFH)
0 678
(0 - 255)
Default
Ref.
(Range)
192 679
(0 - 255)
168 679
(0 - 255)
1 679
(0 - 255)
20 679
(0 - 255)
255 679
(0 - 255)