Attach The Protective Cover (Procedure D) - YASKAWA CR700 Technical Manual

Hide thumbs Also See for CR700:

Table of Contents

2.9 Change the Drive Enclosure Type

A - Conduit bracket

Use the included screws to install the front cover to the base.

While slightly lifting the front cover, tighten the screws to a correct tightening torque:

• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)

A - Front cover

Attach the Protective Cover (Procedure D)

Install the Top Protective Cover

Put the hooks on the back of the top protective cover into the hook holes on the top of the drive.

Move the top protective cover forward to align the screw holes.

Tighten the screws to a correct tightening torque:

• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)

B - Back side of top protective cover

B - M4 × 10 pan head screws

Figure 2.44 Install the Conduit Bracket

B - M4 × 10 truss head screws

Figure 2.45 Install the Front Cover

C - Temporary placement holes

D - M4 × 8 pan head screws

Figure 2.46 Install the Top Protective Cover

YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual