Bitmap Cell Height For Graphic Or Udf, Define; Bitmap Cell Width For Graphic Or Udf, Define - Intermec 4630 User Manual

Default: n = 0
Notes: Parameters for the default field:
Bar code = Code 39
Check digits = disabled
Data length = 20
Data origin = Print mode
Field direction = 0°
Field origin = 0,0

Bitmap Cell Height for Graphic or UDF, Define

Defines the height of a graphic or user-defined font.
Purpose:
Syntax:
y n
n can range between 1 and 600. n is the number of rows for a graphic or font
(bitmap).
For outline fonts, n is the height of the base character in number of dots.
Default: n = 1
n = 10
Notes: An error code (52) is generated for an invalid height.

Bitmap Cell Width for Graphic or UDF, Define

Defines the maximum width for a graphic or any character in a font. Each
Purpose:
character has a width within this amount, which should be at least as wide as
the widest character in the font.
Syntax:
x n
n can range between 0 and 599. n is the number of columns for the UDC,
bitmap, or user-defined font.
For outline fonts, n is the width of the base character in number of dots.
Default: n = 1
n = 10
Notes: An error code (52) is generated if the width is invalid.
Height magnification = 50
Interpretive = disabled
Prefix = none
Ratio= 3 to 1
Width magnification = 1
Bitmap fonts and graphics
Outline fonts
Bitmap fonts and graphics
Outline fonts
Program Mode Commands
6
6-51