Removing The Heim Joint - Husqvarna FE 250 2016 Repair Manual

9.19 Removin the heim joint
9 SHOCK ABSORBER, SWINGARM
-
Check the piston rings for damage and wear.
If damage or a bronze-colored surface is visible:
-
Change the piston.
201404-10
Condition
The shock absorber has been removed.
-
Clamp the shock absorber in the vise using soft jaws for pro­
tection.
Remove the collar bushing of the heim joint.
I
Drift (f 1 20) (i!!l
-
Turn the shock absorber and remove the second collar bush­
ing of the heim joint.
-
Remove seal rings
-
Press the heim joint against a lock ring using the special tool.
I
Pressing tool (T1207S)
-
Remove the second lock ring
-
Place special tool
(D
joint with special tool
I
Pressing tool (T1207S)
p. 329)
O
on both sides.
(a p. 330)
@}.
f)
underneath and press out heim
@).
(i!!l p. 330)
41
61