Checking The Electric Starter Drive - Husqvarna FE 350 2014 Repair Manual

ENGINE
18
18.4.31

Checking the electric starter drive

Check the gear mesh and bearing of starter idler gear
If there is damage or wear:
-
Change the starter idler gear.
Check the gear mesh and bearing of torque limiter
If there is damage or wear:
-
Change the torque limiter.
Check the gear mesh and bearing of freewheel gear
If there is damage or wear:
-
Change the freewheel gear or bearing.
8
Check freewheel for damage and wear.
If there is damage or wear:
-
Change the free wheel.
Check the gear mesh of starter motor
If there is damage or wear:
-
Change the starter motor.
(D
Change O-ring of the starter motor.
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the positive cable of the
power supply briefly with the connector of the starter motor.
If the starter motor does not turn when the circuit is closed:
-
Change the starter motor.
·-•
0
0
O
for damage and wear.
8
for damage and wear.
fD
for damage and wear.
0
for damage and wear.
305006-10
159