Removing The Anti-Tilt Bracket - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 54: Installing the anti-tilt bracket (B)
▶ Fasten the anti-tilt bracket on the rear of the server with two knurled thumb
screws.
4.10.2

Removing the anti-tilt bracket

▶ Loosen the two knurled thumb screws on the anti-tilt bracket (see
Figure 54).
▶ Remove the anti-tilt bracket from the rear of the server.
98 Upgrade and Maintenance Manual TX1330 M4