Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 472

Converting a floorstand model to a rack model
Figure 312: Installing accessible drive dummy covers
▶ If available, reinstall all accessible drive dummy covers into their original
locations (rotated by 90 degrees):
▶ Ensure that an accessible drive filler cover has been installed in every
empty drive bay.
Use the dummy covers that have been removed from the front
cover during the preliminary steps.
▶ Turn the front cover face down.
▶ Join the two lugs on one edge of the accessible drive cover with the right
inner edge of the front cover (1).
▶ Fold down the accessible drive cover until it snaps in place (2).
▶ Install the rack front cover, see
472
"Installing the rack front cover" on page
Upgrade and Maintenance Manual
66.
TX1330 M4