Upgrading Or Replacing The Cpu - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Processor (CPU)
For system relevant information, see the hardware configurator of your
server available online at the following address:
https://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
11.3

Upgrading or replacing the CPU

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from its
socket, place it upside down on a nonconducting, antistatic surface.
▶
Never push a CPU over a surface.
Preliminary steps
▶ If applicable,
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the system fan module, see
page 82.
342
47.
"Removing the system fan module" on
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
45.
99.
48.
50.
TX1330 M4