Indicator On The Odd - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

iRMC-related status signals
ID indicator
flashing blue
flashing blue
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY TX1330 M4
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
17.2.2.3

Indicator on the ODD

ODDs may have an indicator or not.
Figure 334: Indicator on the ODD (example)
1 Activity indicator
TX1330 M4
Global error
indicator
off
flashing orange An emergency flash of the iRMC firmware
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
is in progress.
Appendix A
503