Accessible drives
Figure 261: Removing the locking latch from the ultraslim ODD
▶ Remove the two screws (1).
▶ Remove the locking latch (2).
▶ If the removed ultraslim ODD is not to be replaced by a new drive:
▶ Fasten the locking latch to the ultraslim ODD with its two original screws
to the HDD cage (see
▶ Insert the ultraslim ODD dummy cover (see
Installing the 3.5-inch HDD extension box
▶ Install the 3.5-inch HDD extension box, see
extension box" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
392
Figure
256).
256.
66.
79.
81.
Upgrade and Maintenance Manual
Figure
255).
"Installing the 4x 3.5-inch HDD
TX1330 M4