Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 397

Figure 264: Installing the ultraslim ODD in the ultraslim ODD adapter (B)
▶ Fasten the ultraslim ODD to the ultraslim ODD adapter with two screws (see
circles).
▶ Connect the ODD power cable and the ODD signal cable to the ultraslim
ODD (see Figure
Installing the ultraslim ODD adapter
▶ Install the ultraslim ODD adapter, see
page 366.
▶ Connect the SATA cable from the ultraslim ODD to the system board, see
Figure 244.
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
TX1330 M4
259).
66.
81.
Upgrade and Maintenance Manual
"Installing an accessible drive" on
79.
Accessible drives
397