Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 430

System board and components
Removing the iRMC microSD card
Figure 283: Removing the iRMC microSD card
▶ To eject the iRMC microSD card, gently push it in and then let go (1).
▶ Pull the iRMC microSD card straight out of its slot (2).
CAUTION
(not valid for Europe, Middle East, India and Africa)
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
Concluding steps
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
430
"Installing the system fan module" on
66.
79.
81.
Upgrade and Maintenance Manual TX1330 M4