Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 457

Concluding steps
▶ Connect all cables to the system board.
For the cable plan, see
▶ Install all remaining system board components as shown in the related
sections:
▶ If applicable, install all M.2 SSDs, see
page 434.
▶ If applicable, install the Dual microSD 64GB Enterprise, see
the Dual microSD 64GB Enterprise" on page
▶ Memory modules:
Ensure that you reinstall each memory module in the slot it was
located before the replacement.
▶ Expansion cards:
If applicable, connect the riser card.
▶ If applicable, install the expander board, see
board" on page
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page
▶ Connect all external cables.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
TX1330 M4
"Appendix B" on page
"Installing a memory module" on page
"Installing an expansion card" on page
268.
66.
Upgrade and Maintenance Manual
System board and components
"Installing the M.2 SSD" on
441.
"Installing the SAS expander
"Installing the system fan module" on
79.
81.
519.
"Installing
334.
299.
457