Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 245

Figure 145: Connecting the 8x 2.5-inch HDD/SSD extension box
▶ Connect the cables to the backplane:
1 SAS cable to backplane connector "X9"
2 Power cable
3 If applicable, OOB cable
4 SAS cable to backplane connector "X10"
For more information about connecting SAS cables to the SAS
expander board, see
on page 269.
For the cable plan, see
Example with 4x 2.5-inch PCIe SSD backplane
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
"Connecting cables to the SAS expander board"
"Appendix B" on page
Upgrade and Maintenance Manual
519.
245