Replacing The Heat Sink - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Save & Exit menu.
● Select Save Changes and Exit or Save Changes and Reset.
● Verify that the Global Error indicator stops flashing.
▶ If applicable,
"Updating or recovering the BIOS and iRMC S5" on page
▶
"Resetting the error status after replacing memory modules or CPUs" on
page 110.
▶
"Enabling replaced components in the BIOS" on page
▶
"Resuming BitLocker functionality" on page
11.4

Replacing the heat sink

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
TX1330 M4
81.
Upgrade and Maintenance Manual
Processor (CPU)
115.
121.
Hardware: 15 minutes
103.
353