Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 255

Figure 153: Installing the PCIe SSD backplane (A)
▶ At a slight angle, fit the PCIe SSD backplane into the three recesses in the
PCIe SSD extension box (1).
▶ Fold down the HDD/SSD backplane (2).
▶ Fasten the HDD/SSD backplane with two screws (see
Concluding steps
▶ Install the 8x 2.5-inch HDD/SSD extension box, see
inch HDD/SSD extension box" on page
▶
"Reassembling" on page
▶ Reinstall all HDDs/SSDs into their original bays in the HDD extension box,
see "Installing 2.5-inch HDD/SSD modules" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
241.
66.
79.
81.
Upgrade and Maintenance Manual
Figure 150).
"Installing the 8x 2.5-
214.
255