Basic Information; Slots And Features; General Memory Population Rules - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX1330 M4:

Table of Contents

Basic information

LAN / USB 2.0

Shared LAN 1 /

USB 3.1 Gen 2

Figure 211: Memory slots overview

The system board is equipped with four memory slots.

The system has to be equipped with at least one memory module.

– Populate memory slot 1 / channel A (DIMM 1A) first.

– Within all channels memory slot 1 must be populated prior to slot 2.

– For maximum performance, populate both channels with the same amount

of memory (symmetric dual channel configuration).

– If memory modules with different capacities are used:

– Install modules with higher capacities first.

– Within a channel, install modules in descending order of capacity.

Upgrade and Maintenance Manual

Table of Contents