Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 302

Expansion cards and backup units
Figure 190: Installing the expansion card
▶ Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot (1).
▶ Clip on the slot cover clamp (2).
▶ Fold down the locking handle on the slot cover clamp until it locks in place
(3).
▶ If applicable, connect a FBU to the expansion card, see
on page 319.
Example PRAID EP5x0i
302 Upgrade and Maintenance Manual
"Installing an FBU"
TX1330 M4