Using A Vsp 628Pro With Web Option - RGBlink VSP 628PRO User Manual

Chapter 4: Controlling Your Processor Remotely

4.4 Using a VSP 628PRO with WEB Option

First, the formation of LAN Remote Control Platform: one Ipad or one Iphone, one router
(with wireless functions, for example with a wireless-enabled VPN router models: Netcore
255 and 266. Volans VE760W, 982W.), one VSP 628PRO processor (can be more
processors, as long as the network interface can be connected to the router)
The first step: LAN Physical Connection: connect VSP 628PRO and routers by CAT5, and
connect routers by CAT5, please use the LAN Ethernet port, WAN port is only used to
connect to external networks, it's not allowed to use in this step.
Connection diagram is as below:
The second step: IP address setup. Please refer to IP Setup steps which in the
"Connecting to an Ethernet Network" section. (Make sure that processors IP address and
router IP address are in the same band.)
When users use Ipad or Iphone, use can use the Safari browser, enter the URL
192.168.0.100 (default) and run. If user using other types of devices will need to install the
kernel webkit browser such as: Apple Safari, Google Chrome or Maxthon browser.
The Installing package will provide Google Chrome browser (windows version).
Note: Internet Explorer, Edge and Firefox are not supported.
The third step: Make connections.
Click icon, run Google Chrome browser, open the page to enter 192.168.0.100
(default) and run.
VSP 628PRO User Manual 59