Wiring Harness, Battery 15; Changing The Main Fuse - Husqvarna FS 450 2018 Repair Manual

Table of Contents

Advertisement

Changing the main fuse

Warning
Fire hazard
Incorrect fuses overload the electrical system.
-
Only use fuses with the required ampere value.
-
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.

WIRING HARNESS, BATTERY 15

Preparatory work
-
Press and hold the kill switch � while the engine is idling until
the engine stops.
-
Remove the air filter box cover.
-
Remove the seat.
(0
p. 1 00)
Main work
O
-
Pull starter relay
from the holder.
-
Take off protection caps@.
-
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire 6).
C,
A spare fuse
is located in the starter relay.
-
Insert a new main fuse.
I
Fuse (58011109110)
(0
-
Check that the electrical system is functioning properly.
Tip
I
Insert a spare fuse so that it is available if needed.
Mount the protection caps.
-
Mount the starter relay onto the holder and route the cable.
Finishing work
-
Mount the seat.
(0
p. 101)
-
Install the air filter box cover.
(0
p. 96)
8.
p. 284)
(0
p. 96)
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

F2303r0

Table of Contents