15 Wiring Harness, Battery; Changing The Main Fuse - Husqvarna FC 350 2016 Repair Manual

Table of Contents

Advertisement

15 WIRING HARNESS, BATTERY

Warning
-
-
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.
128

Changing the main fuse

Incorrect fuses overload the electrical system.
Fire hazard
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Info
Preparatory work
-
Press and hold the kill switch � while the engine is idling until
the engine stops.
-
Remove the air filter box cover.
-
Remove the seat.
(�
p. 94)
Main work
O
-
Pull starter relay
from the holder.
-
Take off protection caps@}.
-
Remove faulty main fuse (5).
Info
You can recognize a faulty fuse by a burned-out fuse
wiref).
8
A spare fuse
is located in the starter relay.
-
Install a new main fuse.
I Fuse (58011109110)
(�
-
Check that the electrical system is functioning properly.
Tip
I
Insert a spare fuse so that it is available if needed.
-
Mount the protection caps.
-
Mount the starter relay onto the holder and route the cable.
Finishing work
-
Mount the seat.
(�
p. 95)
-
Install the air filter box cover.
(�
p. 90)
p. 263)
(�
p. 90)
..

Advertisement

Table of Contents
loading

Table of Contents