2.8
MANEUVERING ON A LONGITUDINAL SLOPE
Proceed and brake gently on longitudinal slopes.
The accessory must face downstream when moving without a load.
The accessory must face upstream when moving with a load.
Before setting the load down, verify that the supporting base can withstand the weight in a stable and safe
manner.
The maximum gradients that must not be exceeded are shown below.
.
2.9
IN CASE OF TIPPING OVER
If the machine should be about to roll over while being manoeuvred, the operator should
remain seated in the cabin. This is in fact the safest place. If the safety belts have been fastened, maximum
protection is ensured. After tipping over and when the machine is stationary and stable, the operator
should exit from the access door, if possible, otherwise the rear window is to be used as an emergency exit.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
29
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000