Table of Contents
Advertisement
2.24
USING THE MACHINE
The following information and standards must be carefully understood and carried out in order to operate
in safe working conditions. Some general behavioural rules and limits of use of the machine are reported
in section 2 of the manual.
2.24.1
DRIVING ABILITY
The vehicle must only be used by qualified and authorised personnel; the minimum training requisites
are:
•
the road circulation licence recognised in the country where the machine operates; the licence
for crane operators; the certificate proving attendance to a course for operating telescopic
handlers;
•
moreover, the operator must be able to read and understand this manual, namely: the operation
of the safety devices fitted on the machine; the location and function of all the controls and
instruments; how to use the machine correctly; the limits of use of the machine; what the
operator must not do or avoid.
2.24.2
RESPONSIBLE USE
To start the engine, the operator must be sat in the driver seat. Inappropriate procedures can cause
unexpected machine movements causing injury to people and damage to objects.
The machine must only be moved with the operator sat in the driver seat.
Never start the engine with electrics in short circuit.
Take care of the machine. If malfunctions or damage to the safety systems arise, immediately inform a
supervisor.
Observe the controls and maintenance schedule described in the "Maintenance" chapter.
Do not perform repair or adjustments unless authorised to do with the necessary training.
Do not tamper with the safety devices.
2.24.3
RESPONSIBLE DRIVING
Do not allow people or animals on the machine or inside the driver cabin. Doing so can obstruct the view,
reducing safety standards and also provoking accidental use of the controls.
Do not listen to music with headsets whilst operating the machine. This can provoke the loss of
concentration and lack of attention during work.
Do not wear loose clothing, chains or belts that can get caught on the control lever or in other parts of the
machine.
Do not drive with greasy hands or shoes.
Adjust the seat and steering wheel positions to guarantee a safe and comfortable use of the controls.
Safety belts must always be fastened. keep a straight position so that parts of the body do not stick out of
the cabin.
Do not use controls such as grips for climbing on to or off the machine.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
45
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Advertisement
Table of Contents
