Steering - Snorkel SR9244 Operator And Maintenance Manual

The machine is at a stop when the engine runs at minimum. Gradually
press the accelerator pedal to start driving.
Push the pedal (1) to increase engine and machine speed, release it
to reduce speed.
Push pedal (2) to slow down or stop the machine. The action is
transmitted directly to the brakes located inside the front axle.
4.3

STEERING

The selector (3) allows you to select one of the 3 possible steering modes:
•
Left position: front and rear steering wheels for "crab" advancement. This
mode is indicated when, during work, lateral displacement is required within
a limited operating space. In this mode the boom functions are disabled by
default; the operator can enable them on the "Boom enabling" control page.
•
Central position: steering front wheels, fixed rear wheels. This mode is
indicated during movements, even within the work site but still significant. It is
mandatory while moving on the road.
•
Right position: front and rear steering wheels for "concentric" advancement.
This mode is suitable when a certain degree of maneuverability is required
even during all the work phases on site.
When driving on roads the selector must be placed in the central position and the red mechanical interlock
must also be engaged. In this mode the gear can be changed only with the lever on the left side of the
steering wheel.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
95
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000