Deutz Engine; Check The Engine Lubricant Oil Level; Check The Cooling Liquid Level - Snorkel SR9244 Operator And Maintenance Manual

5.12

DEUTZ ENGINE

5.12.1

CHECK THE ENGINE LUBRICANT OIL LEVEL

Continue only with engine off. It is forbidden to smoke and have open flames. Attention: in case of hot
lubricant oil, risk of burns. An insufficient and excessive level of lubricant oil causes engine damage. The oil
level should only be verified with the engine stopped and level. If the engine is hot, stop the engine and
check the oil level after 5 minutes. The inspection can be performed immediately if the engine is cold. Pull
out the dipstick and wipe it with a clean cloth, which leaves no fibres. Insert the dipstick completely. Pull
out the dipstick and check that the oil level is between the maximum and minimum.
Only top-up if the level is insufficient, through the inlet after removing the relevant cap.
5.12.2

CHECK THE COOLING LIQUID LEVEL

Proceed only with the engine stopped and at a low temperature so as to prevent burns. With
the engine cold make sure the liquid level in the expansion tank is above minimum. Visually check that the
liquid level does not exceed the maximum level. If the level is insufficient, top-up the tank with suitable
coolant liquid.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
123
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000