Replacing The Fuel Filter/S - Snorkel SR9244 Operator And Maintenance Manual

5.12.9

REPLACING THE FUEL FILTER/S

This operation must be carried out by qualified personnel.
Only proceed with the engine stopped and at a low temperature in order to avoid the risk of burns. Only
use filters with a filtration rating equivalent to that of the previous ones.
• Place a suitable collecting basin;
•
Disconnect the power cord connections;
•
Loosen the drain plug and drain the liquid.
•
Remove the filter element;
•
Clean any dirt from the sealing surface of the new filtering cartridge and the opposite side of the
filter head;
•
Verify that the performance of the new filter fulfils the engine requirements.
•
Moisten the sealing gasket of the new filter with diesel or engine oil and tighten it.
•
Assemble the drain plug;
•
Connect the electrical connections.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
128
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000