Snorkel SR9244 Operator And Maintenance Manual page 51

High beam lights
To activate the high beam lights, push the lever forward until it stops in position. The command only works
when the ignition is on.
Hazard lights
Pull the lever until it stops. The control works even when the ignition is
off.
Direction indicators
Activate the indicators as follows:
a- push the lever up to indicate a left turn
b- push the lever down to indicate a right turn
Windscreen wiper
Press the crown at the end of the lever to activate the water
spraying circuit to wash the front windshield.
Horn
Sound the horn by pressing the central button at the end of the
lever.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
51
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000