Snorkel SR9244 Operator And Maintenance Manual page 83

Steering selector (3):
This allows one of the 3 possible steering modes to be selected:
•
Left position: front and rear steering wheels for "crab" advancement
•
Central position: steering front wheels, fixed rear wheels
•
Right position: front and rear steering wheels for "concentric"
advancement.
When driving on roads the selector must be placed in the central position and the red mechanical interlock
must also be engaged.
Moderate speed must be maintained when travelling in cross mode as this movement usually reduces the
level of safety.
How to align the wheels
Proceed as follows to align the wheels:
• Move the selector (3) to the right and turn the steering wheel until the display shows
the wheel alignment icon on a green background in line with the rear wheels.
•
Move the selector (3) to the central position and turn the steering wheel until the
display shows the wheel alignment icon on a green background in line with the front
wheels.
Align the wheels every time the steering mode is changed, before switching to the new mode and every time
before using the machine.
Pressure of the servo controls (4)
This measured data is not required in normal machine operation but may indicate
the source of an anomaly.
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
83
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000